AFL2-W15B-H61
Step 12:
Replace the back cover and secure it using ten (10) previously removed
retention screws.
7.5.2 WLAN Card Replacement
The AFL2-W15B-H61 has one WLAN card slot. To replace the WLAN card, follow the
instructions below.
Step 1:
Follow all anti-static procedures. See Section
Step 2:
Turn off the power. See Section
Step 3:
Remove the back cover. See Section
Step 4:
Remove the internal aluminum back cover. See Section
Step 5:
Locate the WLAN card.
Step 6:
Disconnect the main and auxiliary antennas on the WLAN module (
Figure 7-5: Removing the Antennas
Step 7:
Push the two spring clips in to release the WLAN card.
Step 0:
7 .3.
1 0 1 6 H
7 .4.1 above.
1 0 1 7 H
7 .2.
1 0 1 5 H
7 .4.2 above.
1 0 1 8 H
F igure 7-5).
1 0 1 9 H
Page 127