AFL2-08A-N26
4.12.5 US B De vic e Co n n e c tio n
NOTE:
User must install the USB 3.0 driver before connecting a USB device to
the system or else the system may not recognize the connected
device.
There are two USB 2.0 connectors and two USB 3.0 connectors on the AFL2-08A-N26. To
connect a USB device, please follow the instructions below.
Locate the USB connectors. The locations of the USB connectors are shown
S te p 1:
in Chapter 1.
Align the connectors. Align the USB device connector with one of the
S te p 2:
connectors on the bottom panel. See Figure 4-21.
Figure 4-21: USB Device Connection
P a g e 41