Bios Menu 24: Iei Feature - IEI Technology afl2-w15b-h61 Introductory Manual

Main Advanced
iEi Feature
⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯
Auto Recovery Function
Recover from PXE
v02.61 ©Copyright 1985-2006, American Megatrends, Inc.

BIOS Menu 24: IEI Feature

Step 13: Save changes and restart the system. If the system encounters a Blue Screen of
Death (BSoD) or a hang for around 10 minutes, it will automatically restore from
the factory default image.
C.4 Setup Procedure for Linux
The initial setup procedure for Linux system is mostly the same with the procedure for
Microsoft Windows. Please follow the steps below to setup recovery tool for Linux OS.
Step 1: Hardware and BIOS setup. Refer to Section
Step 2: Install Linux operating system. Make sure to install GRUB (v0.97 or earlier)
MBR type and Ext3 partition type. Leave enough space on the hard drive to
create the recover partition later.
NOTE:
If the Linux OS is not installed with GRUB (v0.97 or earlier) and Ext3,
the Symantec Ghost may not function properly.
While installing Linux OS, please create two partitions:
Page 178
BIOS SETUP UTILITY
PCIPNP Boot Security
[Enabled]
[Disabled]
Step 0:
AFL2-W15B-H61
Chipset Exit
Select Screen
↑ ↓
Select Item
Enter Go to SubScreen
F1 General Help
F10 Save and Exit
ESC Exit
C .2.1.
1 1 1 5 H