AFL2-W15B-H61
Step 7:
Tighten the screws that pass through the panel mounting clamps until the plastic
caps at the front of all the screws are firmly secured to the panel.
Step 8:
Install the covers into the panel mounting bracket. Each mounting bracket
includes two side covers and one top cover (
Figure 3-18: Tighten the Panel Mounting Clamp Screws
3.12.3 Cabinet and Rack Installation
The AFL2-W15B-H61 flat bezel panel PC can be installed into a cabinet or rack. The
installation procedures are similar to the panel mounting installation. To do this, please
follow the steps below:
F igure 3-18
).
9 1 0 H
Page 35