Figure 3-14: Wall-Mounting Bracket - IEI Technology afl2-w15b-h61 Introductory Manual

AFL2-W15B-H61
The five mounting methods are described below.
3.12.1 Wall Mounting
To mount the flat bezel panel PC onto the wall, please follow the steps below.
Step 1: Select the location on the wall for the wall-mounting bracket.
Step 2: Carefully mark the locations of the four screw holes in the bracket on the wall.
Step 3: Drill four pilot holes at the marked locations on the wall for the bracket retention
screws.
Step 4: Align the wall-mounting bracket screw holes with the pilot holes.
Step 5: Secure the mounting-bracket to the wall by inserting the retention screws into
the four pilot holes and tightening them (

Figure 3-14: Wall-mounting Bracket

F igure 3-14).
9 0 4 H
Page 31