AFL2-W15B-H61
Figure 3-28: DB-9 Serial Port Connector
Step 3:
Secure the connector. Secure the serial device connector to the external
interface by tightening the two retention screws on either side of the connector.
3.13.4.2 RJ-45 Serial Port Connection
Follow the steps below to connect a serial device to the RJ-45 serial port connector of the
AFL2-W15B-H61 panel PC.
Step 1:
Locate the RJ-45 serial port. The location of the RJ-45 serial port is shown in
Chapter 1.
Step 2:
Connect the RJ-45 to COM port cable to the panel PC. Insert the RJ-45
connector end of cable into the RJ-45 serial port. See
Step 3:
Connect the serial device. Connect a serial device to the DB-9 connector end
of the cable. See
F igure 3-29.
9 2 1 H
F igure 3-29.
9 2 0 H
Page 45