Figure 7-1: Back Cover Retention Screws; Removing The Internal Aluminum Cover - IEI Technology afl2-w15b-h61 Introductory Manual

Step 3: Remove a total of ten (10) retention screws from the back cover (

Figure 7-1: Back Cover Retention Screws

Step 4: Carefully separate the back cover from the chassis and lift the cover clear of the
device Step 0:

7.4.2 Removing the Internal Aluminum Cover

To remove the internal aluminum cover, follow the steps below.
Step 1: Remove the seven (7) retention screws securing the internal aluminum cover to
the chassis (
Page 124
F igure 7-2).
1 0 0 8 H
AFL2-W15B-H61
F igure 7-1).
1 0 0 7 H