Usb Device Connection; Figure 3-14: Lan Connection - IEI Technology ICEFIRE2-T10 User Manual

Figure 3-14: LAN Connection

Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
Step 4:
cable RJ-45 connector into the onboard RJ-45 port.

3.4.2 USB Device Connection

There is one USB 3.0 connector located on the right side of the ICEFIRE2-T10. To
connect a USB device, please follow the instructions below.
Located the USB connector. The location of the USB connector is shown in
Step 1:
F igure 1-5.
4 7 6
Step 2: Open the rubber cover.
Align the connectors. Align the USB device connector with the connector on
Step 3:
the ICEFIRE2-T10. See figure below.
Page 28
ICEFIRE2-T10 Mobile Clinic Assistant
Step 0: