Building The Project - ProSoft Technology ProTalk PTQ-104C User Manual

Configuring the Processor with Unity Pro
12TUser Manual
2.3

Building the Project

Whenever the configuration of the PTQ module or the processor is updated, the
changed configuration must be imported from the module. The project must be
built (compiled) before downloading it to the processor.
Note: The following steps show how to build the project in Unity Pro. This is not intended to
provide detailed information on using Unity Pro, or debugging the programs. Refer to the
documentation for the processor and for Unity Pro for specialized information.
To build (compile) the project
1 Review the elements of the project in the Project Browser.
2 When the project is ready to be downloaded, open the B
choose R
EBUILD ALL
form the processor can use to execute the instructions in the project file. This
task may take several minutes, depending on the complexity of the project
and the resources available on the PC.
3 As the project is built, Unity Pro reports its process in a Progress dialog box,
with details appearing in a pane at the bottom of the window. The following
illustration shows the build process under way.
After the build process is completed successfully, the next step is to download
the compiled project to the processor.
Page 26 of 136
P . This action builds (compiles) the project into a
ROJECT
49TPTQ-104C ♦ 48TQuantum Platform
47TIEC 60870-5-104 Client
menu, and
UILD
ProSoft Technology, Inc.
March 4, 2013