Table of Contents
Advertisement
Chapter 2: Setting Up Your Server
Starting your server
Before you start your server for the first time:
■
Make sure that the server and monitor are plugged into a power outlet or
UPS and that the UPS (if you are using one) is turned on.
■
Make sure that all cables are firmly connected to the correct ports and jacks
on the back of the server.
Warning
To start the server:
1
Press the power button.
When the power
button LED is...
Green
Orange
Off
10
When you connect peripheral devices to the server, make
sure that your server and devices are turned off and the
power cords are unplugged.
It means...
The server is turned on.
The server is in Standby.
The server is turned off.
www.gateway.com
Power button
Advertisement
Table of Contents
Troubleshooting
