Rear Calipers And Rotors; Width Adjustment - Factory Five Racing Type 65 Coupe Assembly Manual

Rear Calipers and Rotors

Push the slotted rotor onto the spindle.
Attach the caliper to the spindle using the OEM T-Bird bolts.

Width Adjustment

Mount your wheels and tires.
Lower the frame off the jack stands.
With the car on the ground, check the ride height of the car to the bottom of the 4" frame rail

Front: 4.25"-4.50"
Rear: Usually 4.75" with one person normally in the car or 5.00" with two people in the car.
Jack the rear of the car up and place on jack stands located on the lower control arms near the shock.

This supports the suspension at ride height.
Remove the rear wheels.
Use a couple of lug nuts on the wheel studs to ensure that the rotor is seated correctly.
118
www.factoryfive.com 508-291-3443