Radiator Mounting - Factory Five Racing Type 65 Coupe Assembly Manual

Trim the excess off the lower fan mount tabs.
Attach the fan to the radiator using the black #10 x 1" screws on the top and the #10 x
bottom.

Make sure that the fan blades do not hit the sides of the fan housing once the fan is
attached to the shroud. If they do make contact with the housing, loosen the screws
attaching the mount bars, and bend the tabs of the mount bars so that the fan housing is
not pulled out of round when the fasteners are tightened.

Radiator Mounting

Use a razor knife and slit the 8.5" long sections of fuel line lengthwise.
Push the slit sections of fuel line onto the lower radiator frame mounts at the front of the frame and trim
off any extra.
223
www.factoryfive.com 508-291-3443
5
/ " screws on the
8