Table of Contents
Advertisement
Brake System
Tube bender,
3
/
16
sand paper, brake fluid,
Pedal box hardware, Insulated clip hardware, Brake line components,
master cylinder, Mustang power booster push rod.
Avoid dripping brake fluid on any painted surfaces. Clean up spills immediately. The Master
cylinder that you use depends on the size and number of pistons in the brake calipers.
Manual Brake Master Cylinder and pushrod
Use the ⅜"x 2" bolts provided to mount the master cylinder and spacers to the footbox front wall. The
number of spacers used dictates the height of the brake pedal. Start with one spacer unless you are 6' or
taller then use more.
One of these bolts doubles as a foot box lower mounting bolt.
", ¼" drill bits, drill, rivet gun, marker, tape measure, razor knife, round file or
5
/
" hex key, ½",
16
www.factoryfive.com
9
/
" wrenches.
16
179
508-291-3443
3
/
" brake lines, Mustang
16
Advertisement
Table of Contents
