Factory Five Racing Type 65 Coupe Assembly Manual page 329

Temporarily put the bucket in the hole.
The trim ring is held on by a screw on the bottom. Mark the bottom of the headlight area where the
screw mount is.
Remove the bucket and drill a 5 / " hole through the bottom of the bucket.
16
Screw the bucket to the body using the screw that came in the mounting assembly.
Plug the light into the connector and mount the bulb to the bucket. The slotted parts of the mounting
flange go onto the adjusting screws between the screw head and flange.
Push the spring clip onto the boss near the bottom of the bucket.
328
www.factoryfive.com 508-291-3443