Factory Five Racing Type 65 Coupe Assembly Manual page 149


The Accelerator cable is designed to be used with all types of engines, carbureted or fuel
injected. The stock cable has the barrel end on it for the 4.6L throttle body and the ball for a
Mustang accelerator pedal.
Unpack the throttle pedal and separate the arms. You can leave the screw loose for now as this will be
adjusted for fit later.
Use one ¼"x ¾" screw and locknut from the pedal box hardware position the accelerator pedal using the
top hole in the accelerator pedal mount so that the top of the pedal lines up with the accelerator cable
hole so the cable will come out straight. Mark the lower accelerator pedal mount hole then drill the plate
to bolt the pedal in place.
148
www.factoryfive.com 508-291-3443