Front Suspension Torque Specs Chart
IFS Bracket
IFS components, Mustang strut bolts
These are not used in the complete Coupe kit
Attach the Spindle adapter bracket to the upper control arm to the spindle using the factory strut bolts
and torque to 135-149Nm (100-110 lbft).
Using the 87-93 spindles, use the hole closest to the ball joint and the third hole down. Using a
94-04 Spindles, attach the bracket using the bottom and third hole up so that the ball joint is
further away from the spindle.
Item
Front lower control arm to frame
Front lower ball joint to spindle
Upper A-arm to frame
Upper ball joint to Spindle
Spindle hub nut
www.factoryfive.com
Nm
135-162
100-110
106-163
80-120
135-162
100-110
95-122
70-90
305-338
225-250
71
508-291-3443
Lbft