Side Body Mounts - Factory Five Racing Type 65 Coupe Assembly Manual

Side body mounts


Drill, 5 / " drill bit,
16

Secondary body fasteners
The body sides are mounted using four stainless
The rear most side body mount needs
body is spaced correctly and there is enough thread left so the locking part of the nut is used.
When you are fitting the doors the number of washers may have to be changed to ensure a flush door fit.
The edge of the body doorsill should be flush with the inside side of the doorsill 1"x 1" tube. Use a #6
self-tapping screw to hold it in place if necessary.
Work from the rear of the car towards the front.
3 / " hex key, ½" wrench, marker, ruler.
16
5
7 / " worth of washers between the body and the frame so that the
16
www.factoryfive.com
/ "x 1" bolts with a washer next to the head.
16
341
508-291-3443