Factory Five Racing Type 65 Coupe Assembly Manual page 182

Install the push rod from the power booster into the master cylinder and insert the white plastic bushing
in the ring end.
Hold the rod between the two ears of the brake light switch and slide it over the brake pedal post.
Put the clip through the hole in the pedal so that the push rod will not come off.
View up at the mounted brake pedal
If you plan to race frequently, use some small springs and attach them to the brake pedal and pedal box
to prevent the pedal from moving during severe acceleration.
181
www.factoryfive.com 508-291-3443