Unpacking Your Kit; Body Removal - Factory Five Racing Type 65 Coupe Assembly Manual

Unpacking Your Kit

Customer picking up a kit at our Wareham, MA facility in June 2000.
Please note that your boxes are numbered, when you read your packing list you will see that next to each
assembly there is a number circled. This is the box number that the assembly was packaged in. The kit
is packaged in the order that you will be using the parts.
After everything is safely in your garage, please take the time to open each box and do a physical
inventory of all the parts. It is a good idea to work one box at a time and replace all the contents before
going on to the next box.

Body Removal


Gloves, 2 friends.

Be careful of the raw fiberglass edges, they can splinter into your skin
The body is shipped sitting on the frame.
Using two people, one person on each side of the body hold the body in the wheel well area.
The nose section removes easily from the front. Slide it forward before lifting off.
Carefully pull the front sides of the body out and up around the door hinge mounts while at the same
time lifting the rear of the body.
Rotate the back of the body down and the front up once the back is clear of the frame.
Remove the body by walking towards the rear of the frame.
Store the body on the ground using two 43" long 2"x 4"'s wedged over the doors to keep the sides from
having a lot of weight on them.
52
www.factoryfive.com 508-291-3443