Factory Five Racing Type 65 Coupe Assembly Manual page 365

Wire leads for dash lights and Speedo
Use zip ties from the kit to tie all three wires together.
Attach the loose end of the red wire to the Mustang gauge gray plug pin #7 (Warning Lamps Feed).
Attach the loose end of the blue wire to the Mustang brown gauge plug pin #11.
Attach the loose end of the black wire to the Mustang gray gauge plug pin #14.
Attach the short section of red wire on the 16" section to the horn button.
Use the remaining short section of red wire to jumper over from the horn button to the fan switch. The
connectors for the switch are packed with the fan.
Instrument Lighting
Attach positive leads from the gauges to the blue wire closest to the gauge using the red butt connectors.
The ring connector used to ground the gauge will also act as the ground for the light. Attach the
negative lead from the gauges (except Tach and Electric Speedometer) to the black wire closest to the
gauge using a small ring connector.
364
www.factoryfive.com 508-291-3443