Solid Axle Rear Suspension; Solid Axle Preparation - Factory Five Racing '33 Hot Rod Assembly Manual

Install the calipers on the front spindles. Mount the calipers with the supplied bolts (FFR #14513). Make
sure the pads are loaded into the caliper before installing it.

Solid Axle Rear Suspension

Solid Axle Preparation


¾" sockets, ¾" wrench, ½" drill bit, drill, floor jack, jack stands, Torque Wrench

8.8" Rear axle assembly, Solid axle adapters/hardware Box.
 Use caution when working with the rear end assembly, it weights 225 lbs.
56
www.factoryfive.com 508-291-3443