Hatch - Factory Five Racing Type 65 Coupe Assembly Manual

Hatch

With the help of a friend, place the glass hatch in the opening.
Locate the glass so that the gap is even all the way around the hatch opening. Use coins or washers,
etc... along the bottom and sides so that the hatch is held in position.
The hatch should be flush with the body.
Rotate the frame side hinge arms up and if necessary loosen and rotate the hatch side hinge arms so that
they are flat on each other or parallel.
Use the carriage bolts and locknuts to bolt the arms together from the inside out.
318
www.factoryfive.com 508-291-3443