Gen Iii Cool Fuel Module Installation - Mercury MerCruiser Service Manual

Gen III Cool Fuel Module Assembly and Installation
Description
Pressure regulator screws

Gen III Cool Fuel Module Installation

1. Connect the primary mounting bracket to the Cool Fuel Module. Torque to specification.
Description
Primary bracket screws (Cool Fuel Module)
2. Connect the support bracket to the Cool Fuel Module. Torque to specification.
Description
Support bracket screws (Cool Fuel Module)
3. Install the Cool Fuel Module onto the engine. Torque bracket fasteners to specification.
Description
Primary bracket screw (engine)
Primary bracket nuts (engine)
Support bracket nut (engine
4. Inspect the fuel outlet line O-ring. Replace if damaged.
5. Apply a thin coat of oil to the O-ring.
Page 2B-8
Primary Bracket
Support Bracket
Nm lb. in.
14 124
Nm lb. in.
21.7-25.1
8795
Nm lb. in.
21.7-25.1
8796
Nm lb. in.
27.12-35.25
40.67-54.23
27.12-35.25
90-865376 NOVEMBER 2004
lb. ft.
lb. ft.
16-18.5
lb. ft.
16-18.5
lb. ft.
20-26
30-40
20-26