Additional Functions On Chart Page; Turning Off Information On Icon Points - Standard Horizon CP500 Owner's Manual

· Date = Current Date
· Time = Current Time
· VMG = Velocity Made Good
· ETA = Estimated Time of Arrival
· Scale = Chart Scale
· GSP Status = Shows GPS Fix Status (WAAS, 3D, 2D, ...)
When the GENERAL window is selected and the GPS Chart Plotter is in Home Mode, the BRG
will show - - -, unless the GPS Chart Plotter is navigating to a point. When in Cursor Mode, the BRG
shows the Bearing from the ship's position to the cursor location.
To select the desired field, follow the procedure:
1. Press and hold [MENU] until a field is highlighted (it will be shown in a yellow frame).
2. Move the ShuttlePoint knob to the desired data field (the yellow frame is moved to the
desired data field) and press [ENT]. The popup window will be shown.
3. Move the ShuttlePoint knob up/down or left/right to choose the desired setting and press
[ENT].
4. Press [CLR] to store and exit the editing mode.
Data window field on the NAVIGATION, HIGHWAY, GPS STATUS, and NMEA pages may be
customized in the above manner.
See Par. 10.1.0 if Trip Log is selected in one of the data windows and you want to reset the log.

12.0.4 Additional Functions on Chart page

When on the Chart page, you will notice icons of Buoys, Towers, Lights, Wrecks, Tide
Stations and Port Icons. If the cursor is moved over the top of these icons a popup window
will be shown with information about the icon.

12.0.5 Turning Off Information on Icon Points

The GPS Chart Plotter allows you to select to see information on points, on all items or to
Page 76
NOTE
NOTE
Figure 12.0.3 - Customizing the Data Windows
NOTE
1
CP500