See Par. 10.1.0 if Trip Log is selected in one of the data windows and you want to reset the log.
12.0.4 Additional Functions on Chart Page
When on the Chart page, you will notice icons of Buoys, Towers, Lights, Wrecks, Tide
Stations and Port Icons. If the cursor is moved over the top of these icons a popup window
will be shown with information about the icon.
12.0.5 Turning Off Information on Icon Points
The GPS Chart Plotter allows you to select to see information on points, on all items or to
turn this function off. The default setting is On Points.
1. To change, press [MENU], move the ShuttlePoint knob to highlight SETUP MENU and
press [ENT].
2. Move the ShuttlePoint knob to highlight GENERAL SETUP and press [ENT].
3. Move the ShuttlePoint knob to highlight AUTO INFO and press [ENT].
4. Move the ShuttlePoint knob up or down to highlight OFF, ON POINTS or ON ALL and
press [ENT] or move the ShuttlePoint knob to the right.
5. Press [CLR] or move the ShuttlePoint knob to the left until the Chart page appears.
AUTO INFO Off
12.0.6 Display Mode
Selects from a pre-defined table what cartographic objects are displayed and which display
options are set. Pre-programmed settings are user selectable from Full, Medium, Low, Radar
Page 86
WAAS 3D
Figure 12.0.3 - Customizing the Data Windows
NOTE
AUTO INFO On Points
Figure 12.0.5 - Example of Auto Info settings
AAS 3D
AUTO INFO On All
WAAS 3D
CP590