Additional Functions On Chart Page; Turning Off Information On Icon Points; Setting Up The Chart Page Using The Map Setup Selection - Standard Horizon CP1000C Owner's Manual

1. To change, press [MENU] and move the ShuttlePoint to select SETUP.
2. Press [MENU] and move the ShuttlePoint to select GENERAL SETUP.
3. Press [ENTER] or move the ShuttlePoint knob down to highlight WINDOW SETUP.
4. Press [ENTER] or move the ShuttlePoint knob down to highlight CHART PAGE.
5. Select the desired window, HIGHWAY or COMPASS and press [ENTER] or move the
ShuttlePoint knob to the right.
6. Press [CLEAR] or move the ShuttlePoint knob to exit the menu and show the Chart Page.

10.0.1 Additional Functions on Chart Page

When on the Chart Page you will notice icons of Bouys, Towers, Lights, Wrecks, Tide
Stations and Port Icons. If the Cursor is moved over the top of these icons a popup window
will be shown with information about the icon.

10.0.2 Turning Off Information on Icon Points

The GPS chartplotter allows you to select to see information on points, all items or to turn
this function off.
1. Press [MENU] and move the ShuttlePoint knob to highlight SETUP.
2. Move the ShuttlePoint knob to highlight GENERAL SETUP and press [ENTER].
3. Using the ShuttlePoint knob, highlight AUTO INFO and move the ShuttlePoint to the
right.
4. Select the Off, On Points, or On ALL and press [ENTER] or move the ShuttlePoint to
the Right.
5. Press [CLEAR] or move the ShuttlePoint knob to the left until the chart page appears.

10.0.3 Setting up the Chart Page using the Map Setup Selection

With a NT chart installed, the display of the chartplotter is visually communicated to
+
navigators as never before. To simplify the customization of the chart display, the map
settings are now re-organized in modes allowing the user to choose the preferred setting.
Pre-programmed settings are user selectable from Full, Simple, Fishing, Low and Custom.
The default setting is Custom. The custom selection allows the user to customize the chart
to user preferences. The chart below shows the selections for each mode:
Setting
Names
Nav-Aids
Light Sectors
Attention Areas
Tides & Currents
Seabed Type
Ports & Services
Tracks & Routes
Underwater Objects
Depth Areas
Depth Areas <
Depth Areas >
Depth Lines & Soundings
Depth Lines & Soundings <
Depth Lines & Soundings >
Rivers & Lakes
Natural Features
GPS chartplotters
Full Simple
On On
US US
On Off
On On
On On
On Off
On On
On Off
On Off
On On
0005 0005
0030 0030
On On
9999 0005
0000 0000
On On
On Off
Fishing Low
On Off
US US
Off Off
On Off
On Off
On Off
Off Off
Off Off
Off Off
On Off
0005 0005
0030 0030
On Off
9999 0005
0000 0000
Off Off
Off Off
Page 57