Roll Paper Cover / Cover Open Button; Cutter Cover; Control Panel - Epson TM-TM88V-i Technical Reference Manual

Roll paper cover / Cover open button

When setting or replacing the roll paper, press the cover open button to open the roll paper cover.
Do not open the roll paper cover during printing or while the auto-cutter is operating.

Cutter cover

The auto-cutter is inside the cutter cover. Open the cover when roll paper is jammed in the printer or
to return the cutter blade manually.

Control Panel

Name
(Power) LED On
Off
Error LED Off
On
Flashing
Paper LED Off
On
Flashing
Feed button Pressing this button once feeds the roll paper by one line. Holding this button down
feeds the roll paper continuously.
16
Status
Power is being supplied.
Power is not being supplied.
Normal operation (online)
 Immediately after the power is turned on or immediately after a reset
(offline).
Automatically goes off after a while to indicate that the printer is ready.
 The end of the roll paper is detected, and when printing has stopped
(offline). If this happens, replace the roll paper.
An error has occurred
(For details about the flash codes, see
There is a sufficient amount of roll paper remaining.
There is little or no roll paper remaining.
A self-test printing standby state and macro execution standby state
(Power) LED
Error LED
Paper LED
Feed button
Description
"Error Status" on page 22.)