Table of Contents
Advertisement
Installation and activation of
the NWL-15 router
Installing the router
After you have mounted the router and connected a power source, follow these steps to complete the installation process.
1.
Connect equipment that requires network access to the Ethernet port of your router. This may be your computer for
advanced configuration purposes, or your end equipment which requires data access via the NWL-15 router. You can
connect one device directly, or several devices using a network switch.
2.
Ensure the external power source is switched on and wait 2 minutes for your NWL-15 router to start up. To check the
status of your router, compare the LED indicators on the device with those listed on page 8 of this guide.
3.
Open a web browser (e.g. Internet Explorer, Firefox, Safari), type
The web-based user interface log in screen is displayed.
4.
Enter the login username and password. If this is the first time you are logging in or you have not previously configured the
password for the "root" or "admin" accounts, you can use one of the default account details to log in.
Note: To access all features of the router, you must use the root manager account.
For security reasons, we highly recommend that you change the passwords for the root and admin accounts upon initial
installation. You can do so by navigating via the menu to the System and then Administration page.
5.
The Status page is displayed when you log in successfully.
www.netcommwireless.com
Figure 17 – Log in prompt for the web-based user interface
ADMIN MANAGER ACCOUNT
Username:
admin
Password:
admin
Table 9 - Management account login details
http://192.168.1.1
into the address bar and press Enter.
ROOT MANAGER
ACCOUNT
Username:
root
Password:
admin
NetComm Wireless Light Industrial M2M Router Plus
19
Advertisement
Table of Contents
