Line Monitor - JRC JMA-3300 Series Instruction Manual

4.3.7

LINE MONITOR

Serial communication data can be seen on the built-in Line monitor.
Line monitor can be used to make sure that the serial data are received properly.
"Line Monitor" operations
1 Open Test - Line Monitor .
"Line Monitor" menu appears.
Receive Data: The received serial communication data are displayed.
Send Data:
Soft key 1:
Press the soft key 1 to select the port for serial communication data.
Soft key 2:
Press the soft key 2 to switch the display.
Soft key 3:
Press the soft key 3 to stop/start scrolling.
Soft key 4:
Press the soft key 4 to clear all listed serial communication data.
The transmitted serial communication data are displayed.
GPS NMEA1 Gyro/Compass NMEA2
Keyboard Scanner
ASCII Binary
Stop Play
Clear
Chapter 4 MAINTENANCE
4.3 PERFORMANCE CHECK
4
4-11