Freq Field Shortcuts; Q Field Shortcuts; Eq Memory View Shortcuts; (Analog / Digital) Input (#) - Bus Page Shortcuts - Zaxcom Deva 16 User Manual

Chapter 8_______________________________________________________Zaxcom Deva User's Manual

Freq field Shortcuts

See: Common Data Entry Field Shortcuts List

Q field Shortcuts

See: Common Data Entry Field Shortcuts List
BACKSPACE key – 1) The first time the backspace is pressed it enters a decimal point.

EQ Memory view Shortcuts

1 – 5 keys
E key
BACKSPACE key – returns to the EQ page.
(Analog / Digital) Input (#) – BUS page Shortcuts
LEFT / RIGHT ARROW keys – select which bus (Disk Channel vs. Output Channel)
1 – 9 and 0 keys
E key
(Analog / Digital) Input Delay page Shortcuts
0 – 9 keys – opens the data entry field for the currently selected (highlighted) button (see Enter Delay button

Enter Delay button Shortcuts

See: Common Data Entry Field Shortcuts List

Disk Folders page Shortcuts

None

Name Folder button Shortcuts

See: Common Keyboard page Shortcuts

Folder "???" Contents page Shortcuts

None

Enter Seg # button Shortcuts

See: Common Data Entry Field Shortcuts List

Mirror Drive page Shortcuts

Typing a number opens a Segment number data entry field. Once entered, the system enters it as the Start Seg
button's data.
Typing a second number opens a second Segment number data entry field. Once entered, the system enters it
as the End Seg button's data.

Start Seg field Shortcuts

See: Common Data Entry Field Shortcuts List

End Seg field Shortcuts

See: Common Data Entry Field Shortcuts List
2) If the cursor is on the last character, it deletes the character at the cursor and moves
the cursor left one character.
3) If the cursor is not on the first or last character, it moves the cursor left one position,
without deleting the character.
4) If the cursor is on the first character, it has no effect.
2) If the cursor is on the last character, it deletes the character at the cursor and moves
the cursor left one character.
3) If the cursor is not on the first or last character, it moves the cursor left one position,
without deleting the character.
4) If the cursor is on the first character, it has no effect.
– pressing one of them loads / saves (depending on the mode) in the respective memory.
– exits the EQ page and returns to the
– cycles cross-points
– exits the BUS page and returns to the
channel
Shortcuts). Type the remainder of the number.
{p.159}
{p.159}, with the following exception(s):
Analog Input (#) page
{p.159}
{p.159}.
{p.159}
{p.159}
{p.159}
166
{p.89} for this channel.
Analog Input (#) page {p.89} for this