Boot-Up Shortcuts; Page Level Shortcuts; Boot Keys; Home Page Shortcuts - Zaxcom Deva 16 User Manual

Zaxcom Deva User's Manual_______________________________________________________Chapter 8
F3 key
F4 key
F5 key
F6 key
F7 key
F8 key
F9 key
F10 key
INS key
0 – 9 keys
M key
Arrow keys – navigation in pages.

Boot-up Shortcuts

Page Level Shortcuts

MENU key – Press and hold it to pause the startup sequence until you release it, allowing you to read all of the

Boot Keys

Hold down one of the following keys during bootup to change the Deva's behavior:
F6 key
0 key
9 key
STOP key

Home page Shortcuts

Using the Deva front panel:

ENTER key – (hold for 1 second) Lock the touchscreen.
o MENU key
F1 key
F2 key
F3 key
F4 key
F5 key
F6 key
Pressing a Recording channel for about 2 seconds – solos that channel to the headphones, the Headphone
o Pressing any other track SOLOs that track. The left and right headphone channels display the solo'd track's #.
o Pressing the Headphone button, cancels the SOLO.
ENTER key – (press for about 2 seconds) to lock the touchscreen (press the MENU key to unlock).
SHIFT key+Recording channel – arms / disarms the track that was touched. A disarmed track has a line
– (first press) displays the
(second press) closes the False Start dialog without doing anything to the dialog.
– (first press) displays the
(second press) displays the Timecode Diagnostics page.
– displays the Scene Take Note page
– (first press, if Fader-8 assigned) displays the
(next press) displays the
(next press) return to previously displayed page.
– displays the Meter Labels page
– edit the Scene button in the
– edit the Take button in the
– edit the Note button in the
– displays the Home page
– displays the Enter Segment data entry
press the ENTER key. Once entered, the system attempts to move to the day's recording, by
the segment # entered. If the number entered is too high, the last available segment is displayed.
– toggle Mix-12 meters between prefader input level and the disk mix.
information.
– causes the Deva (v6.06C or later) to reconstruct corrupted folders. This should allow folders to
be mirrored in a normal way.
– forces 48 kHz mode (in v3.56 and later) (also forces Deva to read corrupted folders).
– enables 192 kHz recording speed. This is somewhat obsolete. The current approach is to run
the DSP in fast mode and enable the 192 kHz selection.
– forces a factory restore to defaults.
– press to unlock the touchscreen.
– go to the Cue Mode page
– flags the currently displayed Take as a "CIRCLE TAKE".
– (first press) displays the
(second press) closes the False Start dialog without doing anything to the dialog.
– (first press) go to Timecode page
(second press) go to the Timecode Diagnostics page.
– go to Scene Take Note page
– (first press, if Fader-8 assigned) go to
(next press) go to Headphone Mix page
(next press) return to previously displayed page.
button displays SOLO, the left and right headphone channels display the solo'd track and the
other track audio bars are grayed out.
through it long wise and the bar indicating the audio level changes to Blue.
False Start dialog {p.139}.
Timecode page {p.57}.
{p.131}.
Headphone Volume page
Headphone Mix page {p.75}.
{p.69}.
Scene Take Note page
Scene Take Note page
Scene Take Note page
{p.35} from anywhere.
field, {p.37}. Type the remainder of the number and
{p.127}.
False Start dialog {p.139}.
{p.57}.
{p.131}.
Headphone Volume page
{p.75}.
161
{p.138}.
{p.131}.
{p.131}.
{p.131}.
{p.138}.