Adjusting Individual Trim Levels Using The Input (#) Page; Adjusting The Delay (Analog / Digital); Adjusting The Delay Using The Input Delay Page; Adjusting The Delay Using The Input (#) Page - Zaxcom Deva 16 User Manual

Chapter 4_______________________________________________________Zaxcom Deva User's Manual
3. Press the Less Gain button or More Gain button to adjust the selected channel(s).
4. Repeat steps 2 and 3 for each additional channel, as appropriate.
All Trim settings can be reset to 0 dB by pressing the Clear Trim button. A dialog appears after pressing the
Clear Trim button requesting confirmation that you want to clear all of the trim settings.
NOTE: If all channels are going to be set at the same level, you can save time by changing them at the same time.
Press the Select All button. Any change made to the level is applied simultaneously to all of the channels.
Pressing either the Mode Status button in the upper-right corner of the page or using the MENU key exits the
(Analog / Digital) Input Trim page
selected)

Adjusting Individual Trim Levels Using the Input (#) page

1. Press one of the Analog (#) buttons on the
(The
2. Slide the graphic fader to the desired position.
Adjusting the Delay
The delay in the Deva provides a way to monitor various input sources that may come into the Deva at slightly
different times. For example, wireless microphones typically require 0 to 8 ms of delay to avoid phasing associated
with mixing wired and wireless sources to a common mix track. The delay does not affect the input signals actual
timecode; it simply allows the signal to align with other sources mixed with it. Both analog and digital inputs can
have a delay added to them.
There are two ways to adjust the delay on channels. If you have multiple inputs, the
Delay page
adjustments to channels, the delay can be adjusted using the Delay button in the

Adjusting the Delay Using the Input Delay page

1. Press the Adjust Delay button on the
(The
2. Press one of the Channel (#) buttons for the channel that requires a delay. (The button changes to White.)
3. Press the More Delay button to add delay. If Delay has been added to a channel, the Less Delay button is
active and can be used to reduce the amount of delay. A maximum of 40 ms of delay can be added to each
channel.
4. Repeat Steps 2 and 3 for additional channel(s).
As an alternative to pressing the More Delay button or Less Delay button, you can press the Enter Delay button
and manually enter the delay using the keypad.
Pressing the Mode Status button in the upper-right corner of the page or using the MENU key exits the
Digital) Input Delay page
{p.87}.

Adjusting the Delay Using the Input (#) page

1. Press one of the Analog (#) buttons on the
(The
2. Press the Delay button. (A dialog appears requesting the amount of delay.)
3. Enter the amount of delay using the numeric keys.
4. Press the ENTER key to complete entering the delay amount.
Pressing either the Mode Status button in the upper-right corner of the page or the MENU key exits the
Input (#) page

Analog Audio Outputs

The Deva has an optional analog output cable, with a DB-25 connector. This cable connects to the right side of
the Deva. See the
The DB-25 connector fans out to six separate XLR outputs. A breakout cable can be purchased from Zaxcom as
an option, or through many retailers. A wiring diagram is also provided in this manual if you want to manufacture
your own breakout cable (see
The eight outputs (six outputs in Deva-5.8) can be assigned from any combination of channels.
{p.87}.
Analog Input (#) page {p.89} for that channel is displayed.)
(Analog / Digital)
{p.109} allows you to adjust all channels from a single page. However, if you are making individual
(Analog / Digital) Input Delay page
{p.109} and brings you back to the
Analog Input (#) page {p.89} for that channel is displayed.)
{p.89} and returns you to the
Right Side Description
Chapter 9 – Equipment Specifications
{p.111} and returns you to the
Input Configure page (Analog Inputs selected)
Input Configure page (Analog Inputs selected)
{p.109} is displayed.)
Input Configure page (Analog Inputs selected)
Input Configure page (Analog Inputs selected)
{p.29} for the location of this connector.
146
Input Configure page (Analog Inputs
(Analog / Digital) Input
Analog Input (#) page
Input Configure page (Analog Inputs selected)
{p.169}).
{p.87}.
{p.89}.
{p.87}.
(Analog /
{p.87}.
Analog
{p.87}.