Wireless Audition & Wireless Re-Record - Zaxcom Deva 16 User Manual

Chapter 6_______________________________________________________Zaxcom Deva User's Manual
If the transmitter gain is under remote control it cannot be controlled locally until the wireless transmitter is out
of range of the IFB signal, the IFB signal is shut down or the recorder is on the
NOTE: Once the transmitter comes back into range, the current remote gain setting will once again take effect.
Wireless Audition & Wireless Re-Record
Each wireless transmitter will replay from its memory card, based on the timecode and user-bits recorded with
the Take. Be sure to change the user-bits each day so that the audio files do not contain the same user-bits on
different days.
When a segment is cued in the
to the wireless cue buffer so the wireless system knows where to locate the audio on the wireless memory card.
The Cue Mode page contains the Cue Toggle button. Pressing this button once opens the Wireless view, pressing
it again reopens the Recorder view.
The Recorder view is used to replay the audio from the Deva's local drive.
The Wireless view is used to replay the audio from the wireless system (Wireless Audition) and to re-broadcast
and re-record the audio stored on the wireless transmitters (Wireless Re-Record).
If timecode and user-bits are manually entered in the Wireless view, the wireless will cue to the exact location
entered, provided the timecode location exists in the available audio files. This direct entry of timecode and user-
bits will remain active until a segment is entered in the Cue Mode page.
Pressing the Wireless Audition button in the Wireless view will cause each transmitter to replay the audio in its
memory card. The audio will replay in sync from all of the transmitters that were used during the original
recording. The recorder's STOP key must be pressed to manually stop the playback from the transmitters. The
transmitters will continue to play into the next segment until the end of the last segment available is reached.
Pressing the Wireless ReRec button in the Wireless view will cause each transmitter to playback the audio in its
memory card. The Deva will go into record mode and will re-record the tracks as if they were being recorded
live. A note in the new file will be automatically generated to indicate the timecode offset that should be entered
into the telecine controller in Post to play the re-recorded file.
The audio will replay in sync from all of the transmitters that were used during the original recording. The
recorder's STOP key must be pressed to manually stop the playback from the transmitters and to stop the Re-
Record process on the recorder. The transmitters will continue to play into the next segment and the recorder
will continue to record until the end of the last segment is reached.
Cue Mode page {p.127}, the timecode and user-bits are automatically transferred
156
Timecode page {p.57}.