Updating Lan Drivers - Fujitsu Primergy BX620 S4 User Manual

Chapter 4 Manual OS Installation
• When a recognized network adapter is present
Perform "4.3.2 Updating LAN Drivers" ( p.76) on the LAN device name under [Network
adapters], then "4.3.3 Installing the LAN Driver" ( p.79) on [Ethernet controller] under
[Other devices].
• When a recognized network adapter is not present
Perform "4.3.3 Installing the LAN Driver" ( p.79) on [Ethernet controller] under [Other
devices].

4.3.2 Updating LAN Drivers

Perform the following procedure on all LAN device names under [Network adapters] in [Device
Manager].
■ For Windows Server 2003 x64
1
Double-click a LAN device name under [Network adapters].
76
When the LAN driver is installed to [Other devices] before updating the driver for the network
adapter recognized immediately after the OS installation, the screen below will appear after
driver installation was initiated.
Clicking [Finish] displays the [Help and Support Center] window. Click [X] to close the window.
After installation, the "!" mark is displayed at the LAN device name in Device Manager. Device
names are displayed properly when all LAN drivers are installed and the system is restarted.
Names of the LAN devices are displayed as follows.
Type of LAN device
Onboard LAN
1Gbit/s Ethernet I/O Module
(PG-LND201)
Eth. Ctrl 2x1Gbit PCI-E 1000-
BASE-T lp (PG-2861L)
table: LAN device name
LAN device name
Broadcom NetXtreme Gigabit Fiber
Broadcom BCM5708S NetXtreme II GigE (NDIS
VBD Client)
Intel(R) PRO/1000 MT Dual Port Server Adapter