Creating Maintenance Tools And Driver Disks; Installing Serverstart - Fujitsu PRIMERGY RX200 S4 User Manual

4.4 Creating Maintenance Tools and
Driver Disks
This section explains how to create the server maintenance tools and driver disks
with FloppyBuilder function of ServerStart.
With FloppyBuilder function of ServerStart, you can create the following tools:
• "Server Management Tools" disk
• DOS Diskette
FloppyBuilder can be used under environments such as:
• The ServerStart system started on a client computer (recommended)
• The ServerStart system started from PRIMERGY Startup Disc on the server
Confirm that the USB floppy disk drive is connected before turning on the server power.
When creating the tools on a client computer, it is necessary to install ServerStart on the client
computer beforehand.
If ServerStart of a different version is installed on the computer, make sure to uninstall the ServerStart.
Then perform installation again.
For details on how to uninstall ServerStart, refer to "

4.4.1 Installing ServerStart

Install ServerStart on a client computer when creating a drive disk using FloppyBuilder function.
System requirements for client computers
Client computers must satisfy the following requirements.
Hardware Personal computers operated with Windows XP Professional
(A DVD drive and minimum 10MB free disk space are required.)
Software Microsoft® Internet Explorer 5.5 or later
Using ServerStart on the server
ServerStart can be installed to the server, Windows Server 2008 or Windows Server 2003 employed.
Install ServerStart in accordance with this chapter.
PRIMERGY RX200 S4 User's Guide
Uninstalling ServerStart" ( p.87).
85