Quick Installation Mode - Fujitsu PRIMERGY RX200 S4 User Manual

Chapter 3 OS Installation

3.1 Quick Installation Mode

In this quick installation mode, the OS is installed after configuring minimum required
settings. To install the OS quickly and easily, use the quick installation mode.
Confirm that the USB floppy disk drive is connected before turning on the server power.
When installing Windows Server 2008 in Quick installation mode, full installation is performed.
When installing Windows Server 2008 (64-bit), and when saving the configuration file to a floppy disk,
the boot priority must be changed using the BIOS Setup Utility before ServerStart startup. For the
procedure for changing the boot priority, refer to "
using ServerStart" ( p.40)
1
Turn on the server and insert PRIMERGY Startup Disc immediately.
ServerStart starts up. The select-media window for the configuration file appears.
48
When installing Windows Server 2008 (64-bit)