Configuring Pstn (Landline Phone) Connection - Visonic PowerMaster-10 Installer's Manual

Step 1
Select "COMMUNICATION"


5.6.2 Configuring PSTN (landline phone) Connection

The PowerMaster panels include a telephone dialer for reporting to Monitoring Stations using several optional Alarm
Formats (see section 5.6.4 option 41) and to Private Telephones (see section 5.6.5 "
configure necessary parameters related to the PSTN telephone line to which the PowerMaster is connected.
04:COMMUNICATION
Enter "1:PSTN TEL LINE", select the menu you wish to configure (see guidance above and in section 5.6.1), then refer
to the table below.
Option
AREA CODE SKIP
D-303222 PowerMaster-10/30 G2 Installer's Guide
Step 2
Select Communication
Sub-menu option

3:C.S. REPORTING

() These options
are available only to
the "Master Installer"
4:PRIVATE REPORT

5:MOTION CAMERA

6:UP/DOWNLOAD

  
1:PSTN TEL LINE
Configuration Instructions
In some older PSTN networks, it may not be possible to dial from the control panel to other
PSTN telephone numbers (such as monitoring stations or private phones), if the dialed
number contains an area code which is identical to the area code of the panel (i.e. both the
panel and the other numbers are in the same PSTN area code).
If you encounter the same problem with the PSTN network the panel is connected to, you
must enter here the area code of the PSTN telephone line to which the panel is connected (up
to 4 digits) so that when dialing to other PSTN phone numbers programmed with the same
area code, the PowerMaster will skip the area code from the dialed number.
Step 3
Select the "Communication" Parameter you wish to configure

01:REPORT EVENTS 
st
02:1 RPRT CHAN
nd
03:2 RPRT CHAN
rd
04:3 RPRT CHAN
05:DUAL REPORT
11:RCVR1 ACCOUNT 
12:RCVR2 ACCOUNT 
16:PSTN/GSM RCV1 
17:PSTN/GSM RCV2 
21:IP RCVR 1 
22:IP RCVR 2 
26:SMS RCVR 1 
27:SMS RCVR 2 
41:PSTN FORMAT 
VOICE REPORT
REPORTED EVENTS

1st private tel #

2nd private tel #

3rd private tel #

4th private tel #

Redial attempts

Voice<-->private

Tel. acknowledge
IMAGE FORWARD
1st e-mail
2nd e-mail
3rd e-mail
4th e-mail
1st MMS tel #
2nd MMS tel #
3rd MMS tel #
4th MMS tel #
PSTN UP/DOWNLOAD
Remote access
Mast. UL/DL code
Inst. UL/DL code
UL/DL Modes
Up/Download tel#
  
MENU you wish
5. PROGRAMMING

46:PSTN RETRIES
47:GSM RETRIES
51:TEL AUTO TEST
52:AUTO-TST TIME
53:COM.FAIL RPRT
PSTN FAIL
GSM/GPRS FAIL
61:CONFIRM ALARM
62:RECENT CLOSE 
63:ZONE RESTORE
64:SYST.INACTIVE
65:TWO WAY VOICE
66:24H ZONE RPRT
SMS REPORT
REPORTED EVENTS

1st SMS tel #

2nd SMS tel #

3rd SMS tel #

4th SMS tel #
VIEW ON DEMAND
VIEW TIME WINDOW
VIEW OTHER ALARM
GPRS UP/DOWNLOAD
Panel SIM Tel #
1st caller ID#
2nd caller ID#
"). Here you
VOICE REPORT
Step 4
See
5.6.4
5.6.5
See
also
User's
Guide
Chap. 6
Section
C.11
5.6.6
5.6.7
43