Configuring Pstn (Landline Phone) Connection - Visonic PowerMaster-10 G2 Quick User Manual

5. PROGRAMMING
Step 1
Select "COMMUNICATION"

5.6.2 Configuring PSTN (landline phone) Connection

The PowerMaster panels include a telephone dialer for reporting to Monitoring Stations using several optional Alarm
Formats (see section 5.6.4 option 41) and to Private Telephones (see section 5.6.5 "
configure necessary parameters related to the PSTN telephone line to which the PowerMaster is connected.
04:COMMUNICATION
Enter "1:PSTN TEL LINE", select the menu you wish to configure (see guidance above and in section 5.6.1), then refer
to the table below.
Option
AREA CODE SKIP
LINE PREFIX
DIAL METHOD
1
Broadband is not applicable for UL installations
2
The name of the product is PowerLink3 IP Communicator
46
Step 2
Select Communication
Sub-menu option
5:MOTION CAMERA
6:UP/DOWNLOAD
1, 2
7:BROADBAND
⋅ ⋅ ⋅
1:PSTN TEL LINE
Configuration Instructions
In some older PSTN networks, it may not be possible to dial from the control panel to other
PSTN telephone numbers (such as monitoring stations or private phones), if the dialed
number contains an area code which is identical to the area code of the panel (i.e. both the
panel and the other numbers are in the same PSTN area code).
If you encounter the same problem with the PSTN network the panel is connected to, you
must enter here the area code of the PSTN telephone line to which the panel is connected (up
to 4 digits) so that when dialing to other PSTN phone numbers programmed with the same
area code, the PowerMaster will skip the area code from the dialed number.
Enter the prefix digit (if necessary) for the system to access an outside telephone line.
Define the dialing method used by the PSTN dialer of the PowerMaster control panel.
Options: pulse and tone (dtmf) (default).
Step 3
Select the "Communication" Parameter you wish to configure
3rd private tel #
→ → → →
4th private tel #
→ → → →
Redial attempts
→ → → →
Voice<-->private
→ → → →
Tel. acknowledge
→ → → →
IMAGE FORWARD
→ → → → 1st e-mail
→ → → → 2nd e-mail
→ → → → 3rd e-mail
→ → → → 4th e-mail
→ → → → 1st MMS tel #
→ → → → 2nd MMS tel #
→ → → → 3rd MMS tel #
→ → → → 4th MMS tel #
PSTN UP/DOWNLOAD
→ → → → Remote access
→ → → → Mast. UL/DL code
→ → → → Inst. UL/DL code
→ → → → UL/DL Modes
→ → → → Up/Download tel#
DHCP Client
MANUAL IP
→ → → → IP ADDRESS
→ → → → SUBNET MASK
→ → → → DEFAULT GW
⋅ ⋅ ⋅
MENU you wish
D-304762 PowerMaster-10/30 G2 Installer's Guide
3rd SMS tel #
→ → → →
4th SMS tel #
→ → → →
VIEW ON DEMAND
VIEW TIME WINDOW
VIEW OTHER ALARM
GPRS UP/DOWNLOAD
→ → → → Panel SIM Tel #
→ → → → 1st caller ID#
→ → → → 2nd caller ID#
RESET MODULE
"). Here you
VOICE REPORT
Step 4
See
Guide
Chapter
6
Section
C.11
5.6.6
5.6.7
5.6.8