Connecting To The Telephone Line - Visonic PowerMaster-10 Installer's Manual

4.2 Connecting to the Telephone Line

Connect the telephone cable to the SET connector and connect the telephone line cable to the LINE connector
(through the desired wiring cable entry).
Note: The telephone cable should be no longer than 3 meters.
A. LINE
B. SET
C. Tel line wall jack
A. LINE
D. 8-position RJ-31X plug
B. SET E. Brown
F. Red
C. RJ-31X cord
Phone wiring in the UK: Line terminals must be connected to pins 2 and 5 of the wall jack.
For all installations: If DSL service is present on the phone line, you must route the phone line through a DSL filter
(refer to MESSAGE TO THE INSTALLER on page 2 for further details).
D-303222 PowerMaster-10/30 G2 Installer's Guide
PHONE WIRING
PHONE WIRING IN NORTH AMERICA
G. Green
H. Gray
I. RJ-31X jack
Figure 4.2 – Phone Wiring
4. PowerMaster-30 G2 INSTALLATION
J. Line from street
K. House phones
17