A3. Electrical - Visonic PowerMaster-10 Installer's Manual

A3. Electrical

PowerMaster-10 G2
External AC/AC Europe: 230VAC 50Hz input, 9VAC 700mA
adaptor output.
USA: 120VAC 60Hz input, 9VAC 1000mA
output.
External AC/DC -
adaptor
Internal AC/DC
Internal switching power supply:
Input: 100-240VAC, 0.12 A Max.
Output: 7.5VDC, 1.2A Max.
Current Drain Approx. 70 mA standby, 1200 mA peak at full
load.
Low Battery 4.8 V
Threshold
Backup Battery
4.8V 1300 mAh, rechargeable NiMH battery
Pack
pack, p/n GP130AAM4YMX, manufactured by
GP or equivalent.
4.8V 1800 mAh, rechargeable NiMH battery
pack, p/n GP180AAM4YMX, manufactured by
GP or equivalent (special order).
4.8V 2200 mAh, rechargeable NiMH battery
pack, p/n GP220AAM4YMX, manufactured by
GP or equivalent. For UL installations.
Caution! Risk of explosion if battery is
replaced by an incorrect type. Dispose of
used batteries according to the
manufacturer's instructions.
Note: For compliance with UL standards the
battery backup period shall exceed 24 hours
and 12 hours for compliance with CE
standards.
Time to Charge
80 % ( 13 Hrs)
Optional Backup See "Backup Battery Options" above
Battery Pack
Time to Charge
80 % ( 24 Hrs)
(optional backup
battery pack)
Wired Detectors NA
Total (Sum)
Current
Site External Siren NA
Current (EXT)
Site Internal Siren NA
Current (INT)
PGM Current sink to control panel GND 100 mA
max.
D-303222 PowerMaster-10/30 G2 Installer's Guide
APPENDIX A. Specifications
PowerMaster-30 G2
NA
External (wall-mounted) switching power
supply 100VAC to 240VAC, 50/60 Hz, 0.5A /
12.5 VDC, 1.6A
Internal switching power supply:
Input: 100-240VAC, 0.5A
Output: 12.5 VDC, 1.6A.
Approx. 40 mA standby, 1400 mA at full load.
7.2 V (6-cell battery pack)
9.6 V (8-cell battery pack)
Backup Battery Options:
Maximum external devices current (1)
1300 mAh 1800 mAh
6 Battery 8-Battery
Pack (2) Pack (3)
4h 210mA 300mA
8h 90mA 160 mA
12h 45mA 90 mA
24h 0mA 25 mA
36h (no backup) 5mA
48h (no backup) (no backup) 0mA
1 Devices that are connected between 12V
terminal and GND of PowerMaster-30 G2 that
includes internal GSM and proximity reader.
2 7.2V 1300 mAh, rechargeable NiMH battery
pack, p/n GP130AAH6BMX, manufactured
by GP.
3 9.6V 1800 mAh, rechargeable NiMH battery
pack, p/n GP180AAH8BMX, manufactured
by GP.
4 9.6V 2200 mAh, rechargeable NiMH battery
pack (special order).
Caution! Risk of explosion if battery is
replaced by an incorrect type. Dispose of
used batteries according to the
manufacturer's instructions.
Note: For compliance with UL standards the
battery backup period shall exceed 24 hours and
12 hours for compliance with CE standards.
80 % ( 30 Hrs) for all battery types
See "Backup Battery Options" table above
NA
36* mA max.
450* mA max @ 12.5 VDC when powered by
AC/DC (10.5 VDC when in standby mode)
450* mA max @ 12.5 VDC when powered by
AC/DC (10.5 VDC when in standby mode)
*
Total PowerMaster-30 G2 output current
(of INT & EXT sirens, PGM output and
detectors) cannot exceed 550 mA.
Current sink to control panel GND 100 mA
max.
2200 mAh
8-Battery
Pack (4)
380mA
200mA
120 mA
45mA
15mA
67