Opening The Powermaster-33 G2 Control Panel And Bracket Mounting; Connecting To The Telephone Line - Visonic PowerMaster-33 G2 Installer's Manual

3.2 Opening the PowerMaster-33 G2 Control Panel and Bracket Mounting

To Mount the Unit:
1. Release the screws
2. Remove the front cover
3. Mark 5 drilling points on the mounting surface
drill 5 holes and insert wall anchors
the back panel with 5 screws

3.3 Connecting to the Telephone Line

Connect the telephone cable to the SET connector and connect the telephone line cable to the LINE connector
(through the desired wiring cable entry). Review Figure 3.1.1 symbol K or Figure 3.1.2 symbol L for details.
Note: The telephone cable should be no longer than 3 meters.
A. LINE B. SET
10
, then
and then fasten
Figure 3.2 – Back Panel Mounting
PHONE WIRING
C. Tel line wall jack
Figure 3.3a – Phone Wiring
A. Mounting surface
B. Back panel
C. 5 screws
* For back tamper
D-306917
PowerMaster-33 G2 Installer's Guide