C o n f i g u r i n g W i r e l e s s S e t t i n g s
You can change modes, specify your SSID, modify your channel (Ad-Hoc mode only),
network speed, access point density, and more. You can also configure network security.
See "Configuring Network Security" for more information.
From the side menu, click Wireless.
1.
Select your information and click Submit.
2.
Click the reset link at the bottom of the screen. The Reset Server screen appears.
3 .
Click Submit and wait five seconds for the print server to reset.
4 .
Even though you submitted your changes, they do not take effect until you reset the
print server.
You must re-enter your access password to make any further changes to the printer
settings.
C o n f i g u r i n g A l e r t s a n d T r a p s
You can configure email alerts and SNMP IP Traps.
Email Alerts
To set an email alert when the printer goes offline, has a paper jam, or other error:
From the side menu, click Alerts and Traps.
1.
4-6 System Administrator's Guide