Help Commands - Avery Dennison Monarch 9460 SNP System Administrator Manual

To show the current IP settings, type
2.
press Enter.
IP is enabled
IP address
Subnet mask
IP Router
(via DHCP
LPD banner
LPD retries are
Service
PXR1E8580_X1
To show the current Avalanche settings, type
3.
and press Enter.
Console IP address: 192.0.0.192
Avalanche is Enabled
Packages installed:
SSCfg: Revision 1
Properties set:
OsVer = 3.0
OsType = PHG2
ProcessorType = MC68336GCAB20
ProcessorRevision = 1F76K
Processor = freescale
Type = M09460
ModelCode = 22
ModelName = PXR1E859E
NetVer = 1.14
EnablerVer = 1.63
RadioType = G
CoreEnabler = 3
To change the SSID, type
4.
To set the IP address, type
5.
To set the subnet mask, type
6.
Type and press Enter to save the settings and initialize the unit.
7.
INIT
Type to exit Telnet.
8.
EXIT
H e l p C o m m a n d s
For help at any time, type "Help" and a list of available commands appears. The Help
command builds on itself, because for each command you type, more details appear for
each option.
Syntax:
help set
DEFAULT
LOAd
PAssword <password>
POrt <name>
NWrk
PROtect <password>
SERVEr
SERVIce
SNMP
Avalanche
POWer
SYSLog
DNS
STRing n "..."
IP
POP3
SMTP
NETWare
POWERON
6-2 System Administrator's Guide
192.0.0.192
255.255.0.0
192.0.0.192
192.0.0.192)
disabled
disabled
Port
X1
set nw ssid testsystem
set ip ad 192.0.0.192
set ip sub 255.255.255.0
Set parameters to factory defaults
Firmware update parameters
Set console password
... Parameter for port <name>
Network Parameters
Set update password
Server Parameters
<name> Service Parameters
SNMP Variables
Avalanche Parameters
Power Management
Syslog Parameters
DNS Parameters
BOT/EOT string
LPD/TCP Parameters
POP3 Parameters
SMTP Parameters
Netware Parameters
<delay-sec> Power on delay
(show TCP/IP settings) and
sh ip
Boot tries 3
Boot method AUTO
Max window
Timeout 0 min
Keepalive 1 min
TCP port
9100
(show all Avalanche properties)
sh ava
and press Enter.
and press Enter.
and press Enter.
10240