General Commands - Avery Dennison Monarch 9460 SNP System Administrator Manual

G e n e r a l C o m m a n d s
From the list of commands, the brackets - [] indicate to pick one of the options listed.
Note: For any command that uses SET, you can also use SHOW to view the current
setting.
CLear/DELete/PUrge
Removes a specified parameter or configuration item.
CLear FATal
Deletes fatal error log.
CLear POrt <portname> JOB
Clears current entry in the print server's internal queue for the specified portname (P1 for the
first parallel port).
CLear PROTECT
Sets the update password to "null."
CLear SERVEr STRing n
Removes BOT/EOT string.
EXIT/^D
Exits console mode.
HElp
Displays the list of available commands.
INitialize
Saves settings and resets unit.
SAVE
Saves configuration settings.
CHange/SEt/DEFine
Sets configuration items.
SEt DEFAULT
Sets print server to factory defaults.
SEt LOAd [EN/DIS]
Enables or disables firmware reload after exit.
SEt LOAd HOst <name>
Sets node name of boot host (NetWare firmware load).
SEt LOAd IP aa.bb.cc.dd
Sets IP address of load host (TCP/IP firmware load).
SEt LOAd SOftware <filename>
Sets print server's firmware filename to load.
SEt PAssword
Sets console password. The default password is access.
Note: The password is case-sensitive.
SEt PROtect <password>
Sets the update password.
SEt SERVEr DEScription
Sets mode description to string displayed with SHOW SERVER command.
SEt SERVEr NAme <name>
Sets server node name.
6-4 System Administrator's Guide