Configuring Tcp/Ip Settings; Specifying The Ip Access Range; Configuring Printranet Settings; Configuring Netware Settings - Avery Dennison Monarch 9460 SNP System Administrator Manual

C o n f i g u r i n g T C P / I P S e t t i n g s
Use this tab to configure the TCP/IP settings.
Enter the various TCP/IP settings including IP Address, Subnet Mask, Gateway,
1.
Boot Method, Boot Tries, and Timeouts as required.
Select any LPD or RARP settings.
2.
Enter the DNS settings.
3.
S p e c i f y i n g t h e I P A c c e s s R a n g e
Use this tab to specify a range of acceptable IP addresses and Subnet Masks.
Click <<Add.
1.
Enter the Starting Address.
2.
Enter the Ending Address.
3.
Click OK when finished.
4.
Click Add>> to enter the Starting Address and Ending Address for
5.
the Subnet Mask.
Click OK when finished.
6.
C o n f i g u r i n g P r i n t r a n e t S e t t i n g s
Use this tab to configure the Printranet settings including POP3 and SMTP.
C o n f i g u r i n g N e t W a r e S e t t i n g s
Use this tab to configure the NetWare settings including Frame Type, Password, and
Configure Bindery File Servers.
5-4 System Administrator's Guide