To Update From A Tftp Server; To Update From A File On Your Computer; Loading The Firmware; Basic Security Configurations - Avery Dennison Monarch 9460 SNP System Administrator Manual

To update from a TFTP server:

Type the TFTP Server IP address.
1.
Type the relative pathname (relative to your TFTP server). Refer to your TFTP
2.
Server's documentation for more information about setting up and using the TFTP
server.
Note: Depending on your TFTP server, you may only need the filename, not the entire
path.
Click Submit to load the firmware. If you lose power while updating the firmware, call
3.
Service.

To update from a file on your computer:

Type the location of the file or click Browse and select the file location.
1.
Click Submit to load the firmware. If you lose power while updating the firmware, call
2.
Service.
Note: Do not turn off the printer while it is updating firmware. It may take several
minutes to complete.
L o a d i n g t h e F i r m w a r e
You can update the firmware in the print server/radio.
Run the UpdateIP utility from our Web site.
1.
Select the update .bin file, print server, then click Update, Start.
2.
If you are using TCP/IP to upgrade, select TFTP PUT from this host.
3.
If you are upgrading using IPX/SPX on a NetWare network to upgrade, select
NetWare GET from a server (If you are using NetWare to upgrade, you need to put
the .bin firmware file in the LOGIN directory of the NetWare server). Click OK.
If you selected TFTP PUT from this host in step 3, enter the configuration password
4.
(default is access) and click Browse to find the .bin firmware file you downloaded.
Click Load. The firmware on your print server will be upgraded to the new version.
If you selected NetWare GET from a server in step 3, enter the configuration
password (default is access). Enter the name of the NetWare server where you
saved the .bin file as the Host Name. Enter the name of the firmware file for File.
Click OK. The firmware on your print server will be upgraded to the new version.
B a s i c S e c u r i t y C o n f i g u r a t i o n s
There are two main decisions to be made when choosing wireless security: encryption
method and authentication protocol. The encryption method determines the algorithm
used to encrypt the message. The authentication type specifies how users are identified
and verified on a network. Is the device seeking connection what (and who) it claims to
be?
Using a Web Browser 4-15