Changing Wireless Settings - Avery Dennison MonarchNet2 9855 Operating Insructions

Changing Wireless Settings

Only configure the settings required for your network/printer.
Click the Wireless tab to configure the wireless network (802.11b/g)
1.
settings.
Set the Mode: Ad-Hoc or infrastructure. In Ad-Hoc mode, you do not
2.
need an access point. Infrastructure mode requires an access point
to communicate.
Set the SSID. The SSID is a unique identifier that must match for all
3.
nodes on a subnetwork to communicate with each other.
Select the Radio type: 802.11b or 802.11b/g.
4.
Set the Ad-Hoc channel: 1 to 11. All devices must be on the same
5.
channel to communicate.
Set the Speed: 1, 2, 5.5, 11, 12, 18, 24, 36, 48, or 54 (megabits per
6.
second).
Set the International Roaming: Disable, Strict, or Flexible.
7.
3-14 MonarchNet2 Operating Instructions