Printing A Network Information Label - Avery Dennison Monarch 9460 SNP System Administrator Manual

2. Press D or U until you see the key you need to set, then press e to edit the value.
For example:
3. Press D or U to scroll through the hex characters for each field. The hex characters
appear in the box and the ASCII equivalent character appears under the hex
character.
4. Press R to select the character shown and move to the next field.
5. When you are finished, press R until you see e. Press e to save the setting or press
X to exit without saving changes. You return to the Keys menu.
Setting the Escape Character
1. This option allows you to set or view the Escape Character (EC).
2. Run-time messages from the radio begin with the EC and the default is the pound sign
(#), which has a decimal value of 35. You may need to change the default EC
character if it conflicts with other data, because unexpected operation could occur.
3. From the Configure menu, select Escape Char.
4. Press D or U to decrease or increase the decimal value.
5. Press L or R when you are finished. Press e to save the setting or X to exit without
saving changes. You return to the Configure menu.
The radio is now configured. Press E until you return to the Pause screen.

Printing a Network Information Label

You can print a network information label with the device name, IP address, and MAC
address as a Code 128 bar code. You can also print the network information as a Code
39 bar code with the correct MIF settings.
1. Turn on the printer.
2. Press M or n. You see the printer's IP address. For example,
3. Press to print a network information label.
Sample Label
Configuring the 802.11b/g and IP Settings 2-15