Printing Info; Resetting The Radio (9460 Only) - Avery Dennison Monarch 9460 SNP System Administrator Manual

Snp printers
Hide thumbs Also See for Monarch 9460 SNP:
Table of Contents

Advertisement

P r i n t i n g I n f o
Do not use supply smaller than 2012 or information may print
off the label.
1. From the RF Network (9460) or Network (9493) menu,
select Print Info. Three wireless network information
labels print.
The first label contains radio version information.
The second label contains the RF (wireless) settings,
including the SSID, security, and signal strength.
The third label contains TCP/IP settings, including the
IP address, boot method, etc.
2. Press the navigation button to return to the RF Network
or Network menu.
Note:
Differences in supported features and
commands exist with the radio versions
(Peg3 vs. Peg4).

Resetting the Radio (9460 only)

After you save the configuration, you must reset the 9460 radio
before the changes take effect. When you select "Reset,"
the radio reinitializes.
Note:
You may lose your current connection and application.
Resetting the network may take up to one minute
before you can access the wireless print server
(radio).
1. From the RF Network menu, select Reset. The radio
reinitializes.
2. Press any navigation button to return to the RF Network
menu.
Resetting vs. Rebooting
Refer to the table below to see how the printer resets and reboots.
Printer
Reset
9460
Reinitializes (restarts) the radio.
Any radio-specific settings are saved after
a reset.
There is no way to set the radio back to
factory defaults from the printer's menu.
9493
Sets the radio back to factory defaults. Any
radio-specific settings are lost after a reset.
2-16 System Administrator's Guide
Mona rch Prin t Se rv er Status
MAC:
Prin ter Mo de l:
Boot Ver :
Application:Peg4 -2.04 (2010.04.09)
Label 1
Wireless In fo rmation
SSID:
Mode :
S pee d :
Secu rity :
Disabled
Sig. Streng th :
Actual SSID:
Assoc. AP MAC: 00-a0 -f8-aa-83 -25
Label 2
T CP /IP
IP Address:
Subnet Mask :
Router:
(set manually)
Boot Method:
Boot Retries:
Timeout:
Keep aliv e :
Label 3
Reboot
NA
Reinitializes (restarts) the radio.
Any radio-specific settings are
saved after a reboot.
00-a0 -f8-5f-72-0b
9 493 SNP
1.0
MON 123
IN FRA ST RUC TUR E
5 4 mb ps
5 1
MON 123
192.0.0.192
255.255.255.0
192.0.192.0
STAT IC
4
0 min
1 min

Advertisement

Table of Contents
loading

This manual is also suitable for:

Monarch 9493 snp

Table of Contents