Setting The Network Card Update Password; Configuring Network Protocols - Avery Dennison Monarch 9460 SNP System Administrator Manual

Setting the Network Card Update Password

When set, the network card update password allows you to change variables in the Web
browser and the remote console.
From the side menu, click Admin. The Web Admin Configuration screen appears.
1.
Click Configure Network Card Update Password.
2.
Enter a new network update password.
3.
Retype the new password to confirm it.
4.
Click Submit.
5.
C o n f i g u r i n g N e t w o r k P r o t o c o l s
Only configure the settings required for your network/printer. To enable or disable
1.
protocols:
From the side menu, click Admin. The Web Admin Configuration screen appears.
2.
Click Protocol Control.
3.
Enable or disable your network protocols and IP protocols.
4.
Note: If you disable the TCP/IP protocol, all IP protocols are disabled automatically.
Click Submit.
5.
Click the reset link at the bottom of the screen. The Reset Server screen appears.
6.
Click Submit and wait five seconds for the print server to reset.
7.
Even though you submitted your changes, they do not take effect until you reset the
print server.
Using a Web Browser 4-11